0570-4553588 
What should copper bar manufacturers pay attention to when processing copper bars
發(fā)布時(shí)間：2023-12-14When the copper bar is crossed, the line should be reasonable according to the position of the hole to reduce unnecessary lines; Pay attention to the strength of the hand, so that there is no scratch on the surface of the copper bar, see the size marked on the drawing, the size of the aperture, and we should cut the material according to the specifications of the copper bar processing machine; The material width and thickness of the copper bar are measured with a caliper before cutting. After confirming that the requirements are met, the material is cut, and the copper bar is placed neatly to avoid scratches.
When the copper bar needs to be tapped, it is necessary to determine whether the aperture of the bottom hole meets the requirements, and then select the corresponding tap tapping. When drilling, we should see the size of the hole filed by the copper bar, and use the corresponding size of the drill to drill; Copper bar should be placed neatly after drilling;
